1
15
64
"
1
11
64
"
1
11
64 "
1
15
64 "
8
10
10
43
2.
Lay Support Plates (#43) on Caster Beam (#8) to line up holes, the
distance between middle holes to side holes is different, see
Front
View
of
Figure 2
. Attach Stop Spools (#12) and Support Plates
(#43) to side of Caster Beam without logo with Bolts (#13) and Nuts
(#28) but
do not
tighten completely. See
Figure 2
.
Repeat step for second Caster Beam.
13
28
43
12
8
Longer
Shorter
Figure 2
Front View
Longer
Shorter
Match holes in Support Plate (#43)
with Caster Beam (#8).
1A.
Attach Caster Wheels (#9 & #10) to Caster Beam. Slide a Caster
Wheel with Lock (#10) through Caster Beam (#8) and secure it with a
Push Nut (#11) as shown in
Figure 1
.
Gently
tap the Push Nut (#11)
with a hammer to secure it in place. On the other end of the Caster
Beam attach a Caster Wheel without Lock (#9). Make sure you have
one Caster Wheel with Lock and a Caster Wheel without Lock for each
Caster Beam. Repeat step for second Caster Beam.
1B.
Attach Tube Plugs (#14) to Caster Beam (#8) as shown in
Figure 1
.
Figure 1
Caster
with
Lock
Caster
without
Lock
9
10
11
14
3
8
READ AND FOLLOW ALL ASSEMBLY, OPERATING, AND
SAFETY INSTRUCTIONS CAREFULLY. AT LEAST TWO (2)
ADULTS ARE NEEDED TO PUT THIS TABLE TOGETHER!
CAUTION:
