Raise Backboard to 10 FT. regulation playing height.
Measure from top of rim straight down to the playing
surface.
Using tape - mark the
side
of the steel actuator (#16)
just under the plastic actuator sleeve (#15) at this 10 ft
rim height. See
Figure 16
.
Lower backboard all the way down. Do not force
actuator once backboard is in it's lowest position.
See
Figure 17
.
Do not
remove adhesive backing from height decal
(#17) yet. Carefully place height decal on backside of
steel actuator (#16) and line up the 10 ft mark on the
tape with the 10 ft mark on the height decal. Decal
should fit correctly onto the backside of the steel
actuator. ( If not , simply trim to fit the top of the
actuator decal).
30.
31.
32.
33.
15
Tape
34.
Remove the adhesive backing from the Height Decal (#17).
Next, carefully align and stick decal to backside of steel
actuator (#16) starting at the
10 ft mark first
. Be sure to
keep the height decal straight and rub out all air bubbles. See
Figure 18
.
17
16
Figure 18
Lowered all
the way down
Tape at 10
feet
Figure 17
Set at 10 feet
Figure 16
Mark with
tape
15
15
Summary of Contents for GOALRILLA CV B3222W
Page 2: ...2...
