7
BACK OF POLE
FRONT VIEW
FRONT
OF POLE
Detail 7
FRONT VIEW
FRONT
OF POLE
9. There are 4 straps #16 used to secure the Yard Guard to your pole as shown in
. Center the
Detail 8
space between the two clips on the back of the pole. Pull each Velcro side towards the front of the pole,
going
the inner most net squares and secure at the front. Starting approximately 16” From the
through
base, continue this process at about 12” increments, until all 4 are used. Refer to
.
Detail 9 - Detail 11
Your Yard Guard is now complete! It is in the deployed position. To store it, during
non-play, bad weather, or rough play follow the steps in the next page.
FRONT OF POLE
15
FRONT OF POLE
BACK OF POLE
Detail 8
Detail 9
Detail 10
Detail 11
FRONT OF POLE
