23
DETAIL B
17mm
TOOLS NEEDED
16mm
MAKE SURE HEADS OF THE BOLTS ARE
INSERTED INTO THE CUT OUT OF THE POLE, IF
NEEDED USE YOUR THUMB TO HOLD THE
BOLTS IN PLACE THEN USE A RATCHET AND
17MM SOCKET ON NUTS
(21)
. TIGHTEN
HARDWARE TIGHT BUT
DO NOT CRUSH TUBE
.
18. In this Step you will continue to tighten the hardware from
previous steps:
First
tighten hardware shown in
Detail A
.
Second
, tighten hardware shown in
Detail B
.
TIGHTEN
HARDWARE TIGHT BUT DO NOT CRUSH TUBE.
21
21
DETAIL A
TIGHTEN THIS HARDWARE
SECOND
.
TIGHTEN THIS
NUT
LAST
, use
17mm
Socket.
Use
17mm
Socket.
Use
17mm
Socket.
Use
16mm
Wrench
NOTE
TIGHTEN THIS HARDWARE
FIRST
.
