ESC GeForce6100SM-M, User Manual

Page: 49 / 90

43
Using BIOS
Power Management Setup
This option lets you control system power management. The system has various power-
saving modes including powering down the hard disk, turning off the video, suspending
to RAM, and software power down that allows the system to be automatically resumed
by certain events.
Phoenix-Award WorkstationBIOS CMOS Setup Utility
Power Management Setup
Item Help
Menu Level
ACPI Function [Enabled]
ACPI Suspend Type [S1&S3]
Power Management [User Define]
Video Off Method [DPMS Support]
HDD Power Down [Disabled]
Soft-Off by PBTN [Instant-Off]
HPET Support [Enabled]
Resume By PCI-E PME [Enabled]
Resume By PCI PME [Enabled]
Resume By WOM/RING [Disabled]
Resume By USB (S3) [Disabled]
Resume By PS2 MS(S3) [Disabled]
Resume By PS2 KB(S3) [Disabled]
Power On By Button Enabled
Hot Key Power ON Ctrl-F1
Power-On by Alarm [Disabled]
X
Day of Month Alarm 0
Time (hh:mm:ss) Alarm 0 : 0 : 0
Power on After Power Fial [Off]
X
F5:Previous Values F6: Fail-Safe Defaults F7:Optimized Defaults
: Move Enter: Select +/-/PU/PD:Value F10:Save ESC:Exit F1: General Help
X
ACPI Suspend Type (S1&S3)
Use this item to define how your system suspends. In the default, S3 (STR), the suspend
mode is a suspend to RAM, i.e., the system shuts down with the exception of a refresh
current to the system memory.
Video Off Method (DPMS Support)
This item defines how the video is powered down to save power. This item is set to DPMS
(Display Power Management Software) by default.
HDD Power Down (Disabled)
The IDE hard drive will spin down if it is not accessed within a specified length of
time.
ACPI Function (Enabled)
Use this item to enable or disable ACPI function.
Power Management (User define)
This item is used to enable or disable users manually define power management.
Soft-Off by PBTN (Instant-Off)
Under ACPI (Advanced Configuration and Power management Interface) you can create a
software power down. In a software power down, the system can be resumed by Wake Up
Alarms. This item lets you install a software power down that is controlled by the power
button on your system. If the item is set to Instant-Off, then the power button causes a
software power down. If the item is set to Delay 4 Sec. then you have
to hold the power button down for four seconds to cause a software power down.
HPET Support (Disabled)
This item enables or disables HPET support.
X