ESC GeForce6100SM-M, User Manual

Page: 30 / 90

24
Installing the Motherboard
COM2: Onboard serial port header (Optional)
Connect a serial port extension bracket to this header to add a second serial port to your
system.
SPDIFO1: SPDIF out header (Optional)
This is an optional header that provides an S/PDIF (Sony/Philips Digital Interface) output
to digital multimedia device through optical fiber or coaxial connector.
CD_IN: Analog audio input connector
Pin Signal Name Function
1
CD_L Left CD-in signal
2
GND Ground
3
GND Ground
4
CD_R Right CD-in signal
2
+5VA 5V analog Power
3
Key No pin
4
GND Ground
Pin Signal Name Function
1
SPDIF SPDIF digital output
WOL1: Wake On LAN Connector (Optional)
If you haveinstalled a LAN card, use the cable provided with the card to plug into the
motherboard WOL connector. This enables the Wake On LAN (WOL) feature. When your
system id in a power-saving mode, any LAN signal automatically resumes the system. You
must enable this item using the Power Management page of the Setup Utility.
1
NDCDB Data carry detect
2
NSINB Serial Data In
3
NSOUTB Serial Date Out
4
NDTRB Data terminal ready
5
GND Ground
6
NDSRB Date set ready
7
NRTSB Request to send
8
NCTSB Clear to send
9
NRIB Ring Indicator
10
Key No pin
Pin Signal Name Function
1
5VSB +5V stand by power
2
GND Ground
3
Ring# Wake up signal
Pin Signal Name
Function
Pin Signal Name Function
1
Not Assigned Not assigned
2
Key No pin
3
+5V IR Power
4
GND Ground
5
IR_TX IrDA serial output
6
IR_RX IrDA serial input