Page:
7
Page:
6
User Manual:
User Manual:
PRECAUTIONS (Continued):
SIMPLE INSTALLATION:
→
Step 1:
Your Esatto vented dryer should be placed in a well ventilated area with no less than
10cm distance from the wall. If placed in a room such as a bathroom, it is recommended
that there are no obstacles within 1.5m of the dryer to allow ventilation.
→
Step 2:
Use a spirit level to ensure that the dryer is level, either when sitting on the ground,
bench or wall mounted. It is critical that the dryer is level during operation, otherwise
damage can be done to the dryer internals.
Important!
Please ensure that the dyer is only ever installed in an internal
environment only (and not outside), or an environment where the dryer
could become wet. Never place the dryer near combustible surfaces
(such as curtains) and ensure the dryer isn’t operating near gas or other
flammable materials.
INSTALLATION UPSIDE DOWN (WALL MOUNTED):
→
Step 1:
Fix the two metal wall brackets onto the wall to align eith the mounting
slots on the dryer. Ensure that the wall is of sufficient strength to support
the dryer weight.
→
Step 2:
Turn the dryer upside down and insert the plastic supports into their slots,
turning them 90 degrees to lock into position.
→
Step 3:
Carefully raise the dryer and hang it on to the wall brackets. This is a 2–3
person job, as the dryer weighs 33kg.
→
Step 4:
Replace the panel sticker with the inverted option (supplied).
