Page:
5
User Manual:
Installation Instructions
BEFORE USING YOUR MINI REFRIGERATOR
→
Remove the exterior and interior packing.
→
Before connecting the refrigerator to the power source, let it stand upright for
approximately 2 hours. This will reduce the possibility of a malfunction in the cooling
system from handling during transportation.
→
Clean the interior surface with lukewarm water using a soft cloth.
INSTALLING YOUR MINI REFRIGERATION
→
The refrigerator should be located on a completely level and flat surface.
→
Leave 5-10cm between each side of the appliance and a minimum of 30cm at the top.
→
Choose a location which is not exposed to sunlight, high temperatures or humidity.
Direct sunlight may affect the acrylic coating and heat sources may increase electrical
consumption. Extreme cold ambient temperatures may also cause the freezer not to
perform properly.
→
The refrigerator can be adjusted by rotating its two front legs. Rotating in a clockwise
direction wil raise the refrigerator.
→
Plug the refrigerator into an exclusive, properly installed-grounded wall outlet.
→
After plugging the appliance into a wall outlet, allow the unit to cool down for 2~3 hours
before placing food or drinks inside.
Operating Your Mini Refrigerator
TEMPERATURE CONTROL
→
Your refrigerator has one control for regulating the temperature.
→
The range of the temperature control is from position” 1” the warmest to “7” the coldest.
Adjust the temperature control to the setting that best suits your needs. The setting of
“4” should be appropriate for home use.
→
The temperature setting “0” is off.
PLACEMENT OF FOOD/DRINKS
→
There should always be some space between items inside for air circulation.
→
Food should be kept within a sealed package to avoid becoming dry or emitting odour.
→
Hot food or drinks should be allowed to cool down before placing within the refrigerator.
Otherwise the interior temperature and electronic consumption will increase.
→
Try to reduce the frequency of the door opening, as this can greatly effect the efficiency
of the refrigerator.
Caution!
Never use any electronic equipment inside the refrigerator.
DEFROSTING
→
Heavy levels of frost will influence the performance of the refrigerator and increase
energy consumption.
→
Defrosting is required when frost reaches ~5mm in thickness.
→
To defrost:
→
Remove all food and drinks from the inside.
→
Remove the drawers and shelves.
→
Unplug the refrigerator and open the doors to allow the refrigerator and
freezer to thaw.
→
Wipe up the water with a dry cloth and clean the inside.
Important!
Do not use boiling water because it may damage the plastic parts. In addition, never use
a sharp or metallic instrument to remove frost as it may damage the cooling coils and will
void the warranty. We recommend using the plastic scraper provided with your unit.
