User Manual
esatto.house
10
11
3. INSTALL THE MICROWAVE
5. BEFORE THE FIRST USE
4. FIX THE MICROWAVE
IN TO PLACE
Install the microwave in to the cabinet.
• Make sure that the back of the oven locks in to the bracket.
• When installing the microwave, ensure that the power cord isn’t
kinked or trapped under the microwave.
• Remove all packaging and clean the interior of the oven.
• Take out and wash the oven fittings with warm soapy water.
Note:
There may be strong odour during the first use, which is the
burning off of any chemical residues from its construction. This is normal
for all microwaves.
IMPORTANT:
The inside of the microwave should only be cleaned with a
damp soft cloth and a small amount of
washing up liquid.
Open the door and fix the microwave into place using Screw B, through
the installation hole (indicated in the diagram below). Then fix the trim-
kit to cover the installation hole.
Operating Your Microwave
SETTING THE CLOCK
When the microwave is first powered, the LED clock
will display “0:00” and the buzzer will sound once.
• Press the “Clock/Kitchen Timer” button twice to
select the clock function, the hour figures will flash.
• Turn the dial to adjust the hour figures (note that the
time is set in 24 hour time, 0-23 hours).
• Press the “Clock/Kitchen Timer” button once again
and the minute figures will flash.
• Using the dial again, adjust the minute figures to
your desired time (i.e. 0-59 minutes).
• To finish setting the time, press the “Clock/Kitchen
Timer” button once again. “:” will flash once and the
time will be set.
Note:
During setting the time, if you press the
“Stop/Clear” button the microwave will return to its
previous status automatically.
MICROWAVE COOKING
To use your microwave to cook/heat your food or
beverage, follow the process below:
• Start by pressing the “Microwave/Grill/Combi/
Conv” button once. The LED display will show
“P100” as a default power.
• Use the dial to select your desired power level,
where P100 indicates a 100% power level
(maximum), through to P10 which indicates
a 10% power level (minimum). Then press the
“Start/+30Sec./Confirm” button to confirm your
selected power setting.
• Now use the dial to set your cooking time, from
0:05 (5 seconds) through to 95:00 (95 minutes).
Then press the “Start/+30Sec./Confirm” button to
start cooking.
Note:
When selecting your desired microwave power
setting, you can select from the following microwave
power levels: P100= 100%, P80= 80%, P50= 50%, P30=
30%, P10= 10%.
GRILL, COMBI OR CONVECTION COOKING
Your microwave has the additional cooking functions of
a Grill, Combination cooking and Convection cooking.
• The Grill function uses 0% Microwave power and
100% Grill element power;
• The Combi function uses 55% Microwave power
and 45% Grill element power; and,
• The Convection function uses 34% Microwave
power and 66% Grill element power.
To use your microwave’s Grill, Combi or Convection
cooking functions, follow the process below:
• Start by pressing the “Microwave/Grill/Combi/
Conv” button. The LED display will show “P100” as a
default power setting.
• Keep pressing the “Microwave/Grill/Combi/Conv”
button to cycle to your desired cooking function.
The Grill cooking function is indicated by “G” being
displayed, the Combi cooking function is indicated
by “C-1” through to “C-4” and the Convection
cooking function is indicated by the convection
temperature display “130°” through to “220°”.
• The Combi cooking modes are as follows:
• C-1 Microwave & Convection
• C-2 Microwave & Grill
• C-3 Grill & Convection
• C-4 Microwave, Grill & Convection
• If using the Convection cooking mode, the
temperature can be selected by turning the dial.
Once your desired temperature setting is displayed,
press the “Start/+30Sec/Confirm” button to confirm
your selection. Then press the “Start/+30Sec/
Confirm” button once again to begin pre-heating.
Once your microwave has reached the pre-heated
temperature, an alarm will sound twice prompting
you to insert your food. Once you’ve inserted
your food, turn the dial to set your cooking time
(where the maximum is 95 minutes) and press the
“Start/+30Sec/Confirm” button to begin cooking.
• Note:
If you are wanting to use the convection
cooking mode without the pre-heating, simply
turn the dial to set your cooking time after
confirming your desired temperature.
Note:
When using the Grill functions, your microwave
buzzer will sound twice at the half-way point of
cooking. As a recommendation, you should turn your
food over at this point for optimum cooking results.
Simply open the door, turn your food, close the door
and then press the “Start/+30Sec/Confirm” button to
continue cooking. If you choose not to open the door,
the microwave will simply continue to operate.
