Esaote MyLabX75VET, Getting Started

Page: 75 / 138

P R E P A R I N G T H E S Y S T E M
MyLab
- G E T T I N G S T A R T E D 4 - 14
GETTI
NG STARTED
13. Avoid any unnecessary mechanical shock to the device while
moving it paying attention to the door jambs and when get in
and out of elevators.
Transporting MyLab When transporting
MyLab
in a vehicle, in addition to the points above,
remember to:

Disconnect and remove all probes and peripheral devices.

Disconnect any cable or item (for example probes, ECG
cable) attached to the device and place the probes in their
cases.

Rotate the control panel in its closing position.

Bring the control panel to its lowest position.

Protect the LCD screen (for example with bubble wrap) and
placed it horizontally, taking care to place something thick
(such as foam or bubble wrap) between the control panel and
the LCD itself, to avoid any contact between the parts and to
avoid screen swing during transportation.

If present, protect the monitor orientable arm so that no
lateral movements are possible (for example with film).

Use the brakes to lock the device when loaded on the vehicle.

Fasten securely the device inside the vehicle.
Quick Displacement
When
MyLab
is equipped with batteries, it can be quickly moved from one
working position to another without partially switching it off.
Wait for the pending operations to be completed and then disconnect the
mains cable:
MyLab
is automatically frozen keeping the LCD display off and
the control panel with the touchscreen on.
The touchscreen displays a message indicating the residual time after which
MyLab
will automatically start the shut down procedure.
Move
MyLab
to the working position and connect it to the mains: the LCD
display is automatically turned on and
MyLab
is ready for its use.
NOTE
Before disconnecting
MyLab
, verify the battery charging status by clicking
on the icon.
NOTE
Fully charged batteries ensure more than half an hour of self-powering.