manualshive.com logo in svg

Esaote MyLabX75VET, Getting Started

Share
Download
Esaote MyLabX75VET Getting Started Download Page 122

P E R F O R M I N G   A N   E X A M

MyLab

  -   G E T T I N G   S T A R T E D

7 - 9

Before archival, Patient Data can be made anonymous by checking the

ANONYMIZE

 box.

NOTE

The native format of the exam can not be made anonymous.

The exam can be simultaneously exported to the local archive and to external
media (in native, DICOM and multimedia formats). Check all the
destinations you want, then press 

O K

 to confirm and close the exam archiving

it in the selected destination(s). 

MyLab

 automatically shows the window

allowing to start the exam.

NOTE

At power-up, 

MyLab

 prompts the operator to archive the last exam

performed if the device was switched off without first closing the exam in

progress.

The exams that have been performed and not archived into the local

database can be locally saved at a later time from Archive Review. Refer to

the specific section of the “Advanced Operations” manual for further

information.

If the

 PAUSE EXAM

 option is checked in Saving Options Menu, pressing 

EN D

EXAM

 also 

PA USE

 will be prompted.

NOTE

At switch off, 

MyLab

 will inform if there are any paused exams.

Monitor adjustments

Tapping the gear icon in the advanced level of the touchscreen, you can
access a menu where quickly and intuitively adjust the brightness and contrast
of the monitor depending on your work environment. Three preset levels are
available: 

DARK ROOM

, 

MEDIUM DARK ROOM

, and 

BRIGHT ROOM

.

You can also customize the 

CONTRAST

, 

BRIGHTNESS

 and 

GAMMA

 values by

tapping 

USER-DEFINED

 and rotating the related knobs. Tap 

FACTORY

DEFAULT

 to go back to the default values.

PHYSICAL CLONE

 and 

SMART CLONE

 act on the resolution when a second

monitor is present; refer to Advanced Operations manual for further
information.

Tap the gear icon again to exit the monitor adjustments menu.

Summary of Contents for MyLabX75VET











































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands