Esaote MyLabOmegaVET, Getting Started, Page: 92 / 122

C U S T O M I Z I N G M Y L A B
MyLab
- G E T T I N G S T A R T E D 6 - 16
WARNING
The displayed Sweep Velocity is correct as long as you do not use a
secondary monitor and/or an incorrectly calibrated monitor.
FOOTSWITCH Folder
This option is used to set which function is associated to each pedal (left, middle
and right) of the footswitch.
Select from the curtain menu the function then press
SAVE
.
PROBE BUTTONS Folder
This option is used to set which function is associated to each probe button.
Select from the curtain menu the function then press
SAVE
.
RAW DATA Folder
When the associated license is enabled and the option selected, data are saved in
raw format for Post Processing elaboration.
Refer to the “Archive” section of this manual for further information on this
feature.
KEYBOARD BUTTONS Folder
This option is used to set which function is associated to
AC Q UIRE
button and to
each of the four configurable buttons (
1
,
2
,
3
, and
4
).
From the curtain menu select the function you desire then press
SAVE
.
NOTE
When the buttons
1
,
2
,
3
,
4
are associated to save image or save clip, they
will be named further in this manual as
IM AG E
or
C LIP
respectively.
1-CLICK CHANGEOVER
ENABLED FOR PW,
CW, M-MODES
When checked, pressing PW from B-Mode,
MyLab
switches to B-Mode Doppler live at once.
When not checked, pressing PW from B-Mode,
MyLab
switches to B live + PW frozen. This step allows to position
the beamline into the target vessel and it is necessary then to
press PW once again.
The same behaviour applies to CW and M Modes.
INVERT CFM AND
DOPPLER SCALE
When checked, it makes the palette/scale inversion
completely independent, even when the automatic inversion
controlled by the steering is enabled (i.e. invert PW
spectrum without inverting the CFM scale).
Fields Action