Esaote MyLab XPro75, Getting Started

Page: 80 / 144

P R E P A R I N G T H E S Y S T E M
MyLab
- G E T T I N G S T A R T E D 4 - 13
wrap) between the control panel and the LCD itself, to avoid any contact
between the parts and to avoid screen swing during transportation.
WARNING
If your
MyLab
is equipped with peripherals, make sure that they are safely
attached using locking belts; for transportation in a vehicle, it is strongly
recommended to remove the peripheral(s) and follow the device
manufacturer guidelines.
CAUTION
The keyboard could be damaged during transportation in a vehicle, if it is
locked.
Moving MyLab
1. Switch the
MyLab
off.
2. Engage the wheel brakes by pressing the pedals fully down.
3. Push in the QWERTY keyboard completely beneath the
Control Panel.
4. Use the handle lever to center the control panel and move it
to a comfortable height for moving.
5. Turn the mains switch off and unplug the power cord,
wrapping it on the rear hook or on the handle to ensure it.
6. Disconnect all external cables, including network and
external devices.
7. Secure all cables, probes and accessories so that they do not
interfere with the wheels. When transporting
MyLab
with the
probes attached, make sure the cables are not dragging on the
floor and that the probes are properly positioned in the cart’s
probe holder.
8. Peripheral device can be placed on the
MyLab
peripheral
platform, provided that it is secured with the locking belt.
9. If peripheral devices are placed on an external additional
platform, be sure they are disconnected from
MyLab
before
moving the ultrasound device.
10. Lock the monitor arm by rotating the lever on the monitor
arm on lock position.
11. Release the wheel brakes and set the steering locks for
comfortable moving.
12. Move the
MyLab
using the front or rear handle.