Esaote MyLab XPro75, Getting Started

Page: 24 / 144

I N T R O D U C T I O N
MyLab
- G E T T I N G S T A R T E D 1 - 6
CONTRAINDICATION
This information notifies the user of a condition in which the system must
not be used. The reason for this is that the risk involved clearly outweighs the
benefits of using the system in such conditions.
Manufacturer’s Responsibility
Esaote is responsible for the safety, reliability and functioning of this product
only if:

the user follows all the instructions contained in the device
manuals for the use and the maintenance of this device;

the manuals are kept integral and readable in all parts;

calibrations, modifications and repairing are performed only
by Esaote qualified personnel;

the environment where the device is used complies with the
current safety rules;

the electrical plant of the environment where the device is
used complies with the current applicable rules and is
perfectly efficient.
Product Life Cycle
Life Time
The safety and efficiency of
MyLab
ultrasound scanners are guaranteed for at
least seven (7) years from the purchase date, provided that:

the device is used in accordance with the instructions given in
the Operator Manual (and its eventual Addenda), which must
be always accessible to the whole personnel in an integral and
readable status;

any installation, maintenance, calibration, modification and
repairing operation is performed on the device only by
Esaote qualified personnel, using original Esaote spare parts.
When approaching the seven (7) years limit from the purchase date, it is
recommended to contact Esaote Service or to visit Esaote web site
(www.esaote.com), to get updated information on the product’s end of life
and/or to agree on the most suitable solution for its safe disposal.