ESAB RobustFeed AVS, Instruction Manual, Page: 19 / 42

5 OPERATION
0446 680 001 - 19 - © ESAB AB 2021
5.7.1 Inlet wire guide
1) Unlock the inlet wire guide quick lock (A) by folding it out.
2) Remove the inlet wire guide (B).
3) Fit the correct inlet wire guide (according to the WEAR PARTS appendix).
4) Lock the new inlet wire guide into place using the wire guide quick lock (A).
5.7.2 Middle wire guide
1) Apply a small amount of pressure to the middle wire guide clip and remove the middle wire
guide (A).
2) Push in the correct type of wire guide (according to the WEAR PARTS appendix). The clip
automatically locks the wire guide when in the correct position.