2 INTRODUCTION
0463 465 001
- 7 -
© ESAB AB 2016
2
INTRODUCTION
Railtrac™ B42V is a system of components that can be configured to create the optimal
solution for your mechanized welding application. To minimise problems associated with
harsh environments, most mechanical parts are constructed in aluminium or stainless steel.
Railtrac™ B42V is designed for horizontal and vertical joints (up, and down, when
applicable).
Features Railtrac™ B42V
• 42 V AC or battery driven with standard Makita® 18 V system.
• High speed and low speed in one unit.
• Micro process controlled electronics package in a single onboard housing.
• Stepper motor both for drive and weaving function.
• Only one cable to the wire feeder (not needed if using the battery) and one cable to the
remote control (if used) but can be run without any remote control.
• The unit can be programmed and run directly from the controls on the Railtrac™
machine if the remote control is lost-damaged or not preferred.
• Dual high-visibility screens for easy viewing in any orientation.
• The remote is programmable for weave patterns and travel speed and is capable of
controlling voltage and wire feed speed in up to 5 standard programs.
• IP44 environmental rating on both the Railtrac™ and the remote control.
• Choose between welding on left side or right side for remote to correspond to carriage
movement.
Direct connection to all new modern ESAB wire feeders
Railtrac™ B42V can be easily connected to most ESAB wire feeders with no major
modification. Remote adapters have to be mounted in wire feeders (Aristo® Feed 3004,
Aristo® Feed 4804, Origo™ Feed 304, Origo™ Feed 484 and Warrior™ Feed 304).
Five programs can easily be stored
As many as five different programs can be stored. Each program is individual and can be
retrieved from the control on the main unit or the remote control.
Remote control of welding parameters and immediate program shift
Both welding current (wire-feed speed) and voltage can be adjusted (in %) during welding.
Stepping up or down between the alternative motion programs is also easy, depending on
welding position.
Resilient programming units with great potential
Straightforward, logically-designed programming units are used to set the values for five
different programs. All speeds are calibrated in millimetre (mm), for the greatest possible
precision and welding quality.
Remote control for the harshest environments
Using the robust and lightweight remote control that comes with the Railtrac™ B42V, the
operator can access and control every function without lifting the welding visor. Individually
shaped buttons for:
• Start and stop
• Shift program
• Travel or welding direction (cutting direction)
• Travel or welding speed (cutting speed)
• Weaving width
• Zero-line displacement
Summary of Contents for Railtrac B42V
Page 1: ...Instruction manual 0463 465 001 GB 20161102 Valid for 1634 xxx xxxx Railtrac B42V ...
Page 2: ......
Page 10: ...2 INTRODUCTION 0463 465 001 10 ESAB AB 2016 Dimensions ...
Page 24: ...ACCESSORIES 0463 465 001 24 ESAB AB 2016 Cable key function diagram ...