ESAB ORIGO Mig C280 PRO, Instruction Manual

Page: 11 / 32

© ESAB AB 2011
- 11 -
bc23de
Recommended fuse sizes and minimum cable areas
Mig C280 PRO 3
∼
50 Hz 3
∼
50 Hz 3
∼
50/60 Hz 3
∼
50 Hz 3
∼
60 Hz 3
∼
60 Hz
Voltage V 230 380 400-415 500 230 440-460
Current A
at 100% duty cycle 13
8
7 5 11 7
at 60% duty cycle 18 11 10 8 18 10
at 30% duty cycle 32 19 18 15 32 17
at 30% duty cycle 4 x 2.5 4 x 1.5 4 x 1.5 4 x 1.5 4 x 2.5 4 x 1.5
Fuse slow A 20 16 16 16 20 16
Mig C340 PRO 3
~
50 Hz 3
∼
50 Hz 3
~
50/60 Hz 3
~
50 Hz 3
~
60 Hz 3
~
60 Hz
Voltage V 230 380 400-415 500 230 440-460
Current A
at 100% duty cycle 16
10
9 7 16 8
at 60% duty cycle 24 15 14 11 23 12
at 30% duty cycle 37 20 21 17 36 19
at 30% duty cycle 4 x 4 4 x 2.5 4 x 2.5 4 x 2.5 4 x 4 4 x 2.5
Fuse slow A 20 16 16 16 20 16
NOTE: The mains cable areas and fuse sizes as shown above are in accordance with Swedish
regulations. They may not be applicable in other countries: make sure that the cable area and fuse
sizes comply with the relevant national regulations.
5 OPERATION
General safety regulations for handling the equipment can be found on
page
4 . Read through before you start using the equipment!
WARNING
Rotating parts can cause injury, take great care.
WARNING
To prevent the reel from sliding off the hub: Lock the
reel in place by turning the red knob as shown on the
warning label attached next to the hub.
WARNING
Secure the equipment - particularly if the
ground is uneven or sloping.
GB