ESAB Origo Mag C140, Instruction Manual

Page: 7 / 29

-- 7 --
MC1425e
5 INSTALLATION
The installation must be executed by a professional.
Note!
Connect the power source to the electricity mains with a network impedance of (C150 -- 0,419, C170 --
0,286, C200 -- 0,203, C250 -- 0,212) ohm or lower. If the network impedance is higher, there is a risk of
flicker in the illuminators.
WARNING!
This product is intended for industrial use. In a domestic environment this product may cause radio
interference. It is the user’s responsibility to take adequate precautions.
5.1 Placing
Position the welding power source such way that its cooling air inlets and outlets are
not obstructed.
5.2 Assembly of components
For packing and shipment of the machine the wheels are detached from the unit.
Before use attach the wheels according to instruction.
WARNING!
5.2.1 Origo
TM
Mag C140
GB