ESAB Mig 4004 iMV, User Manual And Spare Parts

Page: 38 / 92

1) Selector button welding process.
2) LEDs to display of selected process:
Stick electrode
MIG
TIG
3) Selector button type of stick electrode.
4) LEDs to display the type of electrode selected:
Basic
Rutile
Cellulosic (only for version 300)
5) Selector control button Local/Remote - to select the control panel, by Origo 4004 iMV
panel or a with remote control.
6) LEDs to display the type of control selected:
Local
Remote
- 38 -
7) Led VRD - This LED indicates that the open circuit voltage of the machine is
reduced to offer more safety to the operator. This feature does not change the arc
electrode aperture, that require a higher open circuit voltage.
9) Digital display of current, voltage and inductance % (only MIG / MAG) or Hotsart and
Arcforce (only stick electrode).
10) LEDs for display of the selected reading:
Welding current
Welding voltage
Percentage of inductance (only MIG / MAG) or Hotstart and Arcforce (only
stick electrode).
11) Button selector functions:
Hotstart - when selected this feature provides increased current for a short
period of time at the opening of the arc when welding with stick electrode. The
regulator provides a low percentage lower values of this increase. The setting of a
high percentage increases the value of this increase. In TIG welding has no
function.
Arc Force - when selected this feature the arc force is important in determining
how the current changes in response to a change in the arc length. The regulator
provides a low percentage a lower value gives a calmer arc with less spatter.The
setting of a high percentage increases the value of the short-circuit current and
penetration. In TIG welding has no function.