bt07d10
Dismantling the filter
-- 44 --
cltr0de4
MAINTENANCE
Generally, LTR 160/200 do not require any
maintenance. Normally, it is sufficient to blow
out the machine using clean, compressed air
annually, and the dust filter should be cleaned
regularly.
If the machine is set up in dusty or dirty
environments the machine and dust filter should
be cleaned more often.
NOTE:
All warranty undertakings given by the
supplier cease to apply if the customer attempts
to rectify any faults on the machine during the
warranty period.
SPARE PARTS
The spare parts list for the LTR 160 and LTR 200 is published in a separate document with
filename / ordering no. 0457 305 990
Summary of Contents for LTR 160
