ESAB Cutmaster 100 SL100 1Torch, Operating Manual

Page: 58 / 122

ESAB CUTMASTER 120
INTRODUCTION 300X5398
2-2
2.04 Power Supply Specifications
ESAB Cutmaster 120 Power Supply Specifications
Input Power 400 VAC (360 - 440 VAC), Three Phase, 50/60 Hz
Input Power Cable Power Supply includes input cable.
Output Current 30 - 120 Amps, Continuously Adjustable
Power Supply Gas
Filtering Ability
Particulates to 5 Microns
ESAB Cutmaster 120 Power Supply Duty Cycle *
Ambient Temperature Duty Cycle Ratings @ 40° C (104° F)
Operating Range 0° - 50° C
All Units
Duty Cycle N/A 40% 60% 100%
Ratings IEC CE IEC CE IEC CE
Current
120V 120V 100V 100V 80V 80V
DC Voltage
128 128 120 120 112 112
* NOTE: The duty cycle will be reduced if the primary input power (AC) is low or the output
voltage (DC) is higher than shown in this chart.
NOTE!
IEC Rating is determined as specified by the International Electro-Technical Commission.
These specifications include calculating an output voltage based upon power supply rated
current. To facilitate comparison between power supplies, all manufacturers use this out-
put voltage to determine duty cycle.
Power Supply Dimensions & Weight Ventilation Clearance Requirements
30"
762 mm 33,5 kg / 73,8 lb
12"
305 mm
15"
381 mm
Art # A-12887_AC
150 mm
6"
610 mm
24"
150 mm
6"
150 mm
6"
Art # A-14328