ESAB CIGWELD EasyWeld 130, Operating Manual, Page: 15 / 66

EasyWeld / HandyWeld 130
0-5618 2-1 INTRODUCTION
SECTION 2:
INTRODUCTION
2.02 Equipment Identification
The unit’s identification number (specification or
part number), model, and serial number are located
on the Data Plate which is fixed to the bottom of the
welding machine. In some cases, the Data Plate may
be attached to the rear panel. Equipment which does
not have a control panel such as cable assemblies
are identified only by the specification or part num-
ber printed on the shipping container. Record these
numbers on the bottom of page i for future reference.
2.03 Receipt Of Equipment
When you receive the equipment, check it against
the invoice to confirm it is complete and inspect the
equipment for possible damage due to shipping. If
there is any damage, notify the carrier immediately to
file a claim. Furnish complete information concerning
damage claims or shipping errors to the location in
your area listed in the inside back cover of this manual.
Include all equipment identification numbers as
described above along with a full description of the
parts in error.
Move the equipment to the installation site before
unboxing the unit. Use care to avoid damaging the
equipment when using knives, breaker bars, ham-
mers, etc, to unbox the machine and its accessories.
2.01 How To Use This Manual
This Owners Manual only applies to the Part Numbers
listed on page i.
To ensure safe operation, read the entire manual,
including the chapter on safety instructions and
warnings.
Throughout this manual, the words WARNING,
CAUTION, and NOTE may appear. Pay particular at-
tention to the information provided under these head-
ings. These special annotations are easily recognized
as follows:
NOTE!
An operation, procedure, or background infor-
mation which requires additional emphasis or is
helpful in efficient operation of the system.
!!
WARNING
A procedure which, if not properly followed,
may cause injury to the operator or others in the
operating area.
!!
CAUTION
A procedure which, if not properly followed,
may cause damage to the equipment.
WARNING
Gives information regarding possible electrical
shock injury. Warnings will be enclosed in a box
such as this.
DANGER
Means immediate hazards which, if not avoided,
will result in immediate, serious personal injury
or loss of life.
Additional copies of this manual may be purchased
by contacting CIGWELD at the address and phone
number for your location listed in the inside back cover
of this manual. Include the Owner’s Manual number
and equipment identification numbers.
Electronic copies of this manual can also be down-
loaded at no charge in Acrobat PDF format by going
to the CIGWELD web site listed below and clicking on
the Literature Library link:
http://www.cigweld.com.au