- 7 -
GB
© ESAB AB2012
Rating plate with supply connection data
Note! The welding power source is designed for connection to a 400 (380 - 415V) volt system with
four conductors. If the power source is to be used in countries with a higher or lower supply voltage,
the power source must be connected via a safety transformer.
Recommended fuse sizes and minimum cable area
Mig 500i
Mains voltage
Mains cable area mm
2
Phase current I
1eff
Fuse
Anti-surge
Type C MCB
400 V ± 15%, 3 ph
4 G 6
29A
32A
32A
Note!
Use the welding power source in accordance with the relevant national regulations.
(Check with relevant national regulations)
Make sure that the welding power source is connected to the correct supply voltage and that it is
protected by the correct fuse rating. Please refer to the rating plate at the back of the machine for
the mains supply requirement. A protective earth connection must be made in accordance with
regulations.
