- 6 -
GB
© ESAB AB2012
Application class
The symbol indicates that the power source is designed for use in areas with increased
electrical hazard.
4
INSTALLATION
The installation must be executed by a professional
4.1
Lifting instructions
4.2
Location
Place the power source such that its cooling air inlets and outlets are not obstructed.
4.3
Mains supply
Note!
Mains supply requirements
High power equipment may, due to the primary current drawn from the mains supply, influence
the power quality of the grid. Therefore connection restrictions or requirements regarding the
maximum permissible mains impedance or the required minimum supply capacity at the interface
point to the public grid may apply for some types of equipment (see technical data). In this case it
is the responsibility of the installer or user of the equipment to ensure, by consultation with the
distribution network operator if necessary, that the equipment may be connected.
WARNING!
The handles are meant for manual handling of the power source only. For
mechanized handling, please use the lifting eyes.
WARNING!
The lifting eyes are meant for mechanized lifting of the power source only. Do
not attach any accessories such as welding cables, wire feeder or gas cylinder
when lifting the power source using these lifting eyes.
