- 6 -
GB
© ESAB AB2012
4
INSTALLATION
The installation must be executed by a professional
WARNING!
When welding in an environment with increased electrical danger, only power
sources intended for this environment may be used. These power sources are
marked with the symbol
5
OPERATION
General safety regulations for the handling of the equipment can be found
on page 3. Read through before you start using the equipment!
NOTE! When moving the equipment use intended handle. Never pull on the gun.
WARNING!
To prevent the reel from sliding off the hub, lock the reel in place by slotting the
locking lever in the correct position.
WARNING!
Rotating parts can cause injury, take great care.
WARNING!
Risk of crushing! Do not use safety gloves when replacing wire, feed rollers and
wire bobbins.
