ESAB Aristo RoboFeed 3004HW, Instruction Manual, Page: 7 / 26

2 INTRODUCTION
0463 280 201
- 7 -
© ESAB AB 2014
2 INTRODUCTION
The RoboFeed 3004HW and FeedControl 3004HW wire feed unit is intended for MIG/MAG
welding with robotic equipment.
The wire feed unit consists of a drive unit (RoboFeed 3004HW) and a separate electronic
unit (FeedControl 3004HW).
NOTE!
The wire feed unit utilizes the robot's safety system to obtain maximum
interference protection.
ESAB's accessories for the product can be found in the "ACCESSORIES" chapter of
this manual.
2.1 Equipment
The wire feed unit is supplied with an instruction manual and a quick connection for
Marathon Pac™ .