ESAB Aristo FeedControl, Instruction Manual

Page: 6 / 24

- 6 -
CAUTION
Read and understand the instruction manual before
installing or operating.
ESAB can provide you with all necessary welding protection and accessories.
2 INTRODUCTION
The wire feed unit consist of a drive unit (FeedMech 4804) and a separate electronic
unit (FeedControl).
The wire feed unit is intended for MIG/MAG welding along with robotic equipment.
NOTE!
The wire feed unit utilizes the robot's safety system to obtain maximum interference protection.
ESAB's accessories for the product can be found on page 22 .
2.1 Equipment
The wire feed unit is supplied with an instruction manual, and the drive unit with a
sticker with recommended wear parts.
3 TECHNICAL DATA
FeedMech 4804 FeedControl
Power supply 42 V 50-60 Hz 42 V 50-60 Hz
Power requirement 378 VA 378 VA
Motor current I
max
9.0 A 9.0 A
Settings data
Wire feed speed 0.8 - 25.0 m/min
Gun connection EURO
Wire dimension
Fe
Ss
Al
Cored wire
0.6-2.4 mm
0.6-2.4 mm
1.0-1.6 mm
0.8-2.4 mm
Operating temperature -10 to + 40
°
C -10 to + 40
°
C
Weight 9.7 kg 4.9 kg
Dimensions (l x b x h) 383 x 161 x 287 mm 330 x 118 x 320 mm
Shielding gas
max pressure
Gases for MIG/MAG-welding
5 Bar
Gases for MIG/MAG-welding
5 Bar
Maximum permissible load at
60% intermittens
100% intermittens 500 A
280 A 500 A
280 A
Enclosure class IP2X IP2X
GB
© ESAB AB 2014