ESAB Aristo FeedControl, Instruction Manual

Page: 12 / 24

- 12 -
Symbol and function explanations
Gas purging
Used to measure the gas flow or to flush the gas hoses to clean them of any air and
moisture before commencing welding. Gas purging is carried out with the voltage
and wire feed switched off.
Reversed wire feed
Used to reverse the wire, for example when replacing the wire bobbin.
Inching
Used when wire is to be fed without switching on the welding voltage.
Inlet spatter removal air
Outlet spatter removal air
Used for spray-cleaning the contact tip on the welding gun.
Shielding gas in
Shielding gas out
5.2 Gas flow guard (if installed)
The gas flow monitor interrupts the ongoing welding process if the gas flow drops
below 3.5 l/min. When this occurs, an error message is displayed via the control unit.
GB
© ESAB AB 2014