0-5585
13
5.03 Contents
CONTENTS- PROGUARD AUTO-DARKENING WELDING HELMET
Description
Qty
ProGuard Auto-Darkening Welding Helmet
1
Front Cover Lens
2
Inner Cover Lens
2
Sweatband
1
Operating Manual
1
Table 5-2 Packing List
SECTION 6: Operation
6.01 Adjustment of headgear
ProGuard welding helmets are equipped with a comfortable headgear that can be adjusted in three different ways.
Push and Move 'Head Height'
Longitudinal Adjustment
Rake Adjustment
Push and Turn
‘Head Size'
Figure 6-1 Headgear Adjustment
6.02 Performance
To allow the filter to switch both sensors on the front of the filter must not be covered, the filter then switches to the dark state when the
arc strikes and to the clear state when it stops. The filter switches to the light state when the welding arc stops.
6.03 How to Set Shade
On the ProGuard set the shade by turning the knob on the outside of the helmet (pos. 1).
The most suitable setting can be found on the Chart in this brochure or chosen using your experience. This setting can also be made
manually during the welding process.
Summary of Contents for 454641
Page 1: ...AA 10 20 2020 0 5585 ...
