© ESAB AB 1999
- 9 -
bg03d1ea
6.4
Dismantling the motor
f
1
2
3
4
5
6
1.
Remove the plastic cover (a) on the gun housing. Undo the locking screw (b) using
an Allen key and remove the welding hose.
Unload the spring (
c
) and undo the screws (
d
) holding the contact tube.
Remove the tube.
2.
Turn the welding gun upside-down. Wire the feed unit (e) can now be easily removed.
3.
Insert a 90 mm long metal rod with a diameter of 2 mm through the hose connection
hole in the gun housing.
Push out the roll pin (
f
) in the motor shaft which holds the feed roller of the motor
shaft in place.
Remove the feed roller.
GB
