ESA YT4G Visualyser, Hardware Manual

Page: 92 / 178

Chapter 7
YT5T Visualyser
88
Visualyser - Hardware Manual - rev. 1.00
Obtain an IP address via DHCP: by selecting this option, an IP
address is automatically obtained (ensure that the DHCP ser-
ver is enabled on the network)
Specify an IP address: by selecting this option the parameters
must be entered manually (IP Address, Subnet Mask, Default
Gateway)
In case the above data is unknown, contact the network ad-
ministrator.
Name servers
If necessary, the parameters relating to the relative DNS or AL
WINS must be entered
In case the above data is unknown, contact the network admin-
istrator.
Lamp Saver
By enabling the Lamp Saver, the lamp switches off after a time
set in the Wait box.