ESA EC520E, Owner'S Manual

Page: 23 / 40

– 23 – EN
0C28
REPEAT
REPEAT TITLE / CHAPTER
To activate the repeat function, press REPEAT
during playback.
¡ The repeat mode changes as described below every
time you press the button.
DVD-V
REPEAT is available only during playback.
CHAPTER TITLE OFF
( current chapter repeat) ( current title repeat)
(repeat off )
NOTES
¡ Repeat Title/Chapter is not available with some
scenes.
¡ The REPEAT setting will be cleared when moving
to other title or chapter.
REPEAT TRACK
To activate the repeat function, press REPEAT
during playback.
¡ The repeat mode changes as described below every
time you press the button.
CD
TRACK ALL OFF
( current track repeat) ( entire disc repeat)
(repeat off )
NOTES
¡
Repeat setting will be cleared when moving to other
track.
¡
Repeat playback does not function during repeat A-
B playback.
REPEAT A-B
1
Press REPEAT A-B at your chosen starting
point.
¡ “ A-” appears briefly on the TV screen.
2
Press REPEAT A-B again at your chosen
end point.
¡
“ A-B” appears briefly on the TV screen and the
repeat sequence begins.
3
To exit the sequence, press REPEAT A-B.
NOTES:
¡
The repeat A-B section can only be set within the cur-
rent title (for DVDs) or current track (for Audio CDs).
¡
Repeat A-B is not available with some scenes in DVD.
¡
To cancel the A point which was set, press CLEAR.
¡
Repeat A-B playback does not function during title,
chapter, track or all repeat playback.
CD DVD-V
PROGRAM
You may determine the order in which tracks will play.
1
In stop mode, press MODE.
¡
The PROGRAM screen will appear.
2
Press Arrow (
▲
/
▼
)
to select a track, then
press ENTER.
¡ Press CLEAR to erase the
most recently entered pro-
gram.
3
Repeat step [2] until you have selected all
the tracks you want to play in the program.
4
Press PLAY to play the programmed tracks.
NOTES:
¡ While the program is being played back, the STOP
works as follows.
¡
Press STOP once and then PLAY again, playback
will restart from the point where STOP was pressed.
¡
Press STOP twice and then PLAY again, playback will
restart from the track in the usual way. (Program cleared)
¡ Up to 99 tracks can be entered.
¡
To erase all tracks in the program at once, select
ALL CLEAR at the bottom of the list at step [2].
¡ If you like to repeat the current track in the program,
press REPEAT repeatedly until “
TRACK”
appears during playback. If you like to repeat the
entire program press REPEAT repeatedly until
“
ALL” appears during playback.
CD
TOTAL
RANDOM PLAYBACK
This shuffles the playing order of tracks instead of
playback in the sequence.
1
In stop mode, press MODE twice.
¡ RANDOM screen appears.
2
Press PLAY to start random playback.
NOTE:
¡
If you like to repeat the current track in the random
selection, press REPEAT repeatedly until “
TRACK” appears during playback. If you like to
repeat the entire random selection press REPEAT
repeatedly until “
ALL” appears during playback.
CD
PLAY
CD-DA TOTAL 0:45:55
RANDOM PROGRAM
- - no indication - -
RANDOM
SPECIAL PLAYBACK FUNCTION