.
www.esmfg.com
Supplemental instructions for MB110 Fiber Mat Cutters
Thank you for purchasing our MB110 Heavy Duty Cutter for your fiberglass cutting
needs. This tool will give you years of service provided you maintain and care for the
tool properly. Our experience in the composite industry allows us to supplement the
instructions supplied by the manufacturer.
1. Inspect daily the concentricity and condition of the blade. The alignment of the
rotating blade to the carbide counter blade is crucial to the operation of this tool.
Hard items, such as cured composites will damage the blade, the counter blade,
drive gears and possibly the motor. This is a heavy duty textile cutter and is not
meant for cured composites or other hard materials.
2. On or before 150 hours of usage, replace the MB110-050-ASSY. We have
supplied this assembly with your new purchase. This is common with all small
motors. If not changed in a timely, regular manner, critical damage will occur to
the rotor section of the motor. This damage can be fatal and expensive to repair.
Usually to cost of the repair is higher than the cost of a new unit.
3. When replacing the blade, be sure that all surfaces are completely clean. Just
the slightest contamination, especially under the blade will cause damage to the
arbors, blade and counter blade of this unit.
4. Never modify the cord of this unit. It is designed for the correct amperage drawn
from the motor. Any modification of this cord will not only void the warranty, but
create a significant risk of fire or explosion.
5. Use the self sharpening device included with your cutter only when neccessary.
This should be used sparingly, as overuse will cause excessive wear to the
blade.
6. Be sure to lubricate your MB110 daily or every 2 hours of operation, which ever
is greater.
Ph. 727-323-4040 Fax 727-327-9872
