Pr
o
-
C
Series
16
Wheel Cassette
FRONT
SIDE
1/2" deflection
Screw
Screw
MOTOR
The wheel cassette can be serviced through the front panel. The cassette can be slid out for easy access. To remove
the cassette, unplug the leads to the wheel drive motor, then remove the (2) tek screws located near the opening. This
will then allow you to pull the cassette out of the unit through the access door. If the unit is equipped with a rotation
sensor, it must be removed prior to sliding the cassette out.
Remove links from the belt to tension. The belt
should defl ect only 1/2” at the center of free area.
MODEL
PRO-C-1000
PROD-C-2400
PRO-C-1000
4L/”A”
4L/”A”
PRO-C-2400
76”
106”
