11
Turning direction change and check (
C1
)
This operation is only necessary if the operator opens the gate instead of closing it when making a reset (
rS
).
Radio code programming,
P1
(only with RSD receiver)
If a receiver other
than RSD is used, see
the corresponding
instructions.
Open/close programming (
P3
)
The lower closing stopper must be installed before programming the run (see the
operator manual).
O
Wait whilst the door carries
out the open/close.
If you want the door to stop
before reaching the upper
stopper, press the transmitter
button at the required point.
