Network Ernitec Cloud Bullet Camera
·
Quick Start Guide
19
Camera
Switch/Router
Align the snap and notch.
i. Insert
⑤
into
④
.
ii. Secure
⑥
with
④
.
Figure 2-5
Water-proof Accessory Installation
Steps:
1.
Feed the plug less network cable ⑦ through the lock nut ⑥,
waterproof rubber gasket ⑤ (rubber gasket inset ridge must
face waterproof end cap), and the water-proof end cap ④ in
order.
2.
Crimp an RJ-45 network plug onto the end of the cable, taking
care to insert the twisted pairs of wires in correct order.
3.
Place the O-type gasket ② onto the end of the camera’s
network interface socket ①.
