Network Ernitec Cloud Bullet Camera
·
Quick Start Guide
12
WPS/RESET
Figure 1-3
WPS/RESET Button
WPS function and Reset function share the same button. The
button works as a reset button only when you press it when the
camera is powered on.
1.2.2
Setting the WPS Protocol
A wireless router with the WPS function is required to enable the
WPS function of the camera. Refer the steps below.
Steps:
1.
Enable the WPS function of your router. Refer to the operation
guide of your router for detailed procedures.
2.
Press the WPS/RESET button (about 2s) on the camera to join in
the wireless network.
