Service pin
When the LON
®
Box is connected to the LON
®
Network, the service pin must be pressed for
the
NodeManger
software to identify the LON
®
Box. Use a small screwdriver, or similar, to
press the service pin. The yellow LED next to the service pin will light up shortly, when the
service pin is pressed.
Make sure that the
NodeManager
software is running, and online, prior to pressing the
service pin.
It is of out most importance to keep track of the order in which service pins are pressed on
the various SYSTEM X units.
Please see the
NodeManager Manual
for full details on the function, and importance, of the
service pin.
Service pin
RUN
L
E
D
LON SERVICE
Drilling Pattern
228mm
13
0m
m
Drilling pattern
2853-00009
Page 7
S Y S E M
