ERNITEC EDNS V3000 Series User Manual Download Page 60

Page: 60 / 124

Ernitec EDNS V3000 series – user manual

www.ernitec.com

V 2.2.082012

Basic Operation

The DVR allows users to access some general operations

through the front panel easily. The following sections introduce

the general operations of the unit.

4.1

View Live / Playback Video

The general functions in live and playback mode are described in

the following sections.

4.1.1

Viewing Modes

The DVR provides users versatile ways of viewing both live and

recorded video. Following presents these view formats.

Viewing in Full Screen

Press any CHANNEL key directly to view the corresponding

camera image in full screen format.

Viewing in Multi-window

Various multi-window view formats are offered for selection. To

switch between available viewing formats, press MODE

repeatedly.

The available view formats are illustrated as the following figure.

Summary of Contents for EDNS V3000 Series





























































































































Search results

Summary of Contents for EDNS V3000 Series

Reviews:

Related manuals for EDNS V3000 Series

Brands by name

Popular brands

ERNITEC EDNS V3000 Series, User Manual

Search results

Summary of Contents for EDNS V3000 Series

Reviews:

Related manuals for EDNS V3000 Series

Brands by name

Popular brands