ERNITEC Eagle PIR-045 Manual Download Page 6

PIR-045

PASSIVE INFRARED DETECTOR

2800-00006                                                                                                                                                               Page  6 of 10

Maintenance

The detector has been designed to be virtually maintenance free but the following precautions are recommended:

1)

Visual inspection of the front window

 for accumulation of dirt on the outer surface or damage at intervals of app. 6

months. Clean the surface with a paper tissue and avoid rubbing dirt into the surface. Use the same precautions as for

a camera lens.

2)

Visual inspection of the inside

 for ingress of water is recommended at intervals of 6 to 12 months or whenever the unit

is opened for adjustments or tests. Make sure that the sealing gasket is in place before closing the cover tightly again.

3)

Inspection is recommended following extreme conditions

 such as snow storms, sand storms, hail etc. to make sure

that nothing has been damaged and the sensitivity is not reduced by accumulation of snow, sand or dirt on the front

window. Snow or dust in front of the window should be removed by hand or by using of a soft instrument (e.g. a wooden

stick).

General Comment on the PIR-045

 

Despite the advanced design and state-of-the-art features of the PIR-045 it is in the nature of a Passive Infrared Detector

that an absolute detection probability and freedom from nuisance alarms cannot be achieved, 

masking of the PIR-045

cannot be excluded

.

 

Detection is a function of thermal contrast, speed and size of a target crossing the field of view. Contrast conditions can

vary significantly in the course of the day and year.

 

Detection depends also on the sensitivity settings, the exact aiming and the prevailing weather conditions as well as the

nature of the target and background.

 

The detection pattern and frequency response of the 

PIR-045

 has been optimised for the detection of human size targets

crossing the field of view in an upright position at speeds in the range of 0.2 … 5.0 m/s.

 

Detection of slow moving targets at long range may become uncertain under weak contrast conditions. It is strongly

recommended to limit the zone length to less than the nominal range when human targets moving at the minimum

specified speed need to be detected with high probability.

 

Animals or crawling people may or may not be detected depending on their size, speed, contrast and distance from the

PIR-045

.

It is therefore strongly recommended to combine the PIR-045 with an alarm verification such as CCTV or a second system

using other physical means of detection (e.g. VMD).

Any liability for direct or indirect damage resulting from the use of the PIR-045 as a detection device is explicitly disclaimed.

The information in this product manual is based on testing of samples taken at random from production and believed to be

representative, E&OE.

Summary of Contents for Eagle PIR-045











Reviews: