Verarbeitungsspezifikation MaxiBridge CSI
/
Processing Specification MaxiBridge CSI
erstellt: Darius Clement
geprüft: Bernd Schmitt
freigegeben: Achim Schoch
am: 01.12.2017
Version 6
IMS Verarbeitungsspezifikationen
Seite 16 von 26
Fundamentals
The acceptance criteria for cable and harness assemblies in the current IPC-A-620 manual is generally
recommended for the assembly of ERNI connectors
Product characteristics
Crimp-Snap-In connectors of the MaxiBridge product family are available in various versions:
Number of pins single-row connectors
2, 3, 4, 5, 6, and 8-pin
Number of pins dual-row connectors
1)
10 and 20-pin
Connector sizes:
The crimp contacts are available in various sizes:
AWG 24/26, AWG 20
2)
/22 and AWG 18/20
2)
1)
Maximum diameter of the insulation for dual row connectors: 1,55 mm
2)
AWG 20 depending on the insulation diameter (see table 2)
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
