Use and maintenance manual
Longitudinal profile welding
Model: LRWG-100
_______________________________________________________________________________________________________________________
P a g . 1 1
During the welding process, it is always possible to change any of the three settings:
temperature, speed and pressure.
All these settings have a direct effect on the quality of the weld, so a test should be performed
before welding the belt just to make sure all the settings are correct.
The position, angle and proximity of the welder is also very important for the temperature
setting. Increasing the distance or angle in relation to the profile reduces the effectiveness of the
bond between the materials:
Change the position of the welder by first loosening the screws and then tightening them again
once it is adjusted:
Also, you can adjust nozzle’s proximity using the knob:
