Use and maintenance manual
Auto-Puncher for timing belts
Model: APTM-600
____________________________________________________________________________________________________________________
P a g . 1 1
Retighten the 2 bolts.
Close the sliding door and program the correct step in the MENU …. STEP … OK
NOTE:
The cutting pressure must be adjusted for each type of punch or material.
If not, excess pressure may cause the blades to break or premature wear of the cutting
aluminium board.
PUNCH CUTTING A-A direct finger:
Write with pencil a line at 100mm approx. from the beginning of the belt.
Take this line like 0 of total length of final endless measure.
