ERM Neoverse N1 Technical Reference Manual Download

Page: 102 / 241

Table 4-11 SCP interrupts (continued)

Source

Description

229

ccix_negotiated_speed_change

230

ccix_link_training_done

231

ccix_pll_status_rise

232

ccix_message_fifo_interrupt

233

ccix_local_interrupt_ras

234

ccix_hot_reset_irq

235

ccix_flr_reset_irq

236

ccix_power_state_change_irq

237

pcie_aer_interrupt

238

pcie_local_interrupt_reset

239

pcie_local_interrupt_ras

4.3.3

Manageability Control Processor interrupt map

The

Manageability Control Processor

(MCP) receives interrupts from several sources.

The sources of the interrupts to the MCP are:
• Application Processor system wakeup interrupts
• CoreSight power and reset request interrupts
• Internal MCP subsystem interrupts
• Expansion MCP interrupts

The interrupts are routed to the Nested Vector Interrupt Controllers in Cortex

‑

M7 processors where they

can be managed by software.

The following table shows the MCP interrupts.

Table 4-12 MCP interrupts

Source

Description

NMI

MCP Generic Watchdog

MCP Watchdog(WS0)

Reserved

CoreSight

CoreSight debug power up request (If there is a separate debug power domain).

Note

MCP Firmware must support optional debug power up rail.

CoreSight

CoreSight system power up request

CoreSight

CoreSight debug reset request

GIC expansion interrupt

External GIC wakeup interrupt. Generated by the logical OR of all the GIC
Expansion Interrupts.

15-5

Reserved

MCP external IRQ (MCP_EXT_INT)

GPIO

GPIO combined IRQ

4 Programmers model

4.3 N1 SoC interrupt maps

101489_0000_02_en

reserved.

4-102

Non-Confidential - Beta

Summary of Contents for Neoverse N1

















































































































































































































































Search results

Summary of Contents for Neoverse N1

Reviews:

Related manuals for Neoverse N1

Brands by name

Popular brands

ERM Neoverse N1, Technical Reference Manual

Search results

Summary of Contents for Neoverse N1

Reviews:

Related manuals for Neoverse N1

Brands by name

Popular brands