Use and maintenance manual
Manual die cutter
Model: F-121
____________________________________________________________________________________________________________________
P a g . 9
Direct die cut 80x10
Preparation
Once the 80x10 cutting head is assembled, we will move the head to the start of the path on the
right side of the bench (
0
), releasing the
locking cam
from the lower part of the cutting head by
pressing it down.
Once we have reached the end of the route, we will make sure that the head is in
“DF”
position
(direct finger), if not, we will position it in the DF position by pulling up the locking knob.
We will move the head to the DF position, making sure that the handle snaps back into the hole.
