4
инструкция
по
установке
и
эксплуатации
душевой
кабины
DEAR CUSTOMERS!
We thank you for purchasing the shower cabin of ERLIT trade mark and hope that it will
come up to all of your expectations.
The shower cabin can be used in apartments, houses or hotels – in all cases its installation will
be simple and safe, while using it will give you pleasure and bene
fi
t your health.
Shower cabins of ERLIT trade mark combine all of the latest designs developed by our
company, introduced in order to give this product even higher quality and make it even more
convenient in exploitation.
The product you have purchased is manufactured in compliance with modern European
technical standards, meets mandatory construction and sanitary standards.
All products of ERLIT trade mark are manufactured in compliance with requirements of
the highest standards, which de
fi
ne all technical parameters of shower cabins for sale in the
European Union countries.
Please, read this installation and operation manual carefully in order to ensure the safest
and the most effective installation, utilization and maintenance of the product.
Manufacturer reserves the right not to notify the end user about differences in structures
between the obsolete model and the new, improved version of the shower cabin; however, we
are sure that this will not hamper your utilization of the product.
Thank you for the purchase!
GENERAL INFORMATION:
Shower room is for taking water procedures. Functional of shower cabin: hand shower,
hydromassage and overhead (rain) shower, electronic control panel with FM-radio and
Bluetooth, ozonation by timer, LED-lights, fan, chromotherapy.
Optional: folding seat, steam (turkish bath), hydromassage in the tray
TECHNICAL FEATURES:
• Used voltage 220 ± 10%.
• Used water pressure 0.2-0.4 MPa, water discharge 8-12 l/min. Temperature of hot water
fed onto the cabin should not exceed 70°
С
. Installation of coarse water
fi
lters is required.
• Level of canalization draining from
fl
oor up to tray must be at least 70 mm.
• Maximum load to the tray 150 kg.
• Mounting dimensions of hot and cold water pipeline 1/2” (15 mm), drainhole diameter
1-1/2” (40 mm).
EN
