User Manual
17
Settings details
1
Device time and date settings
2
Device network settings
Mode: Selected IP protocol
Hostname: Device name on network
IP: IP address of the device
MASK: network mask
GW: Network gateway
3
Activate/Deactivate the exchange of information
This allows the transmission of information from the device to the eGuard server for:
- remote monitoring via eGuard App (mobile &PC)
- receiving usage reports
4
Halo operation modes
Mode : 24/7
Halo is running 24/7
Mode : Min Max detection
This mode defines a min. and max. fan power
During normal operation, the fan speed is defined by the value entered into the Min. setting. The Halo reaches its
maximum fan speed if the sensor detects a pollution in the ambient air (the treshold value of the sensor has been
reached).
Mode : Detection value only
The ventilation is unactive.The fan automatically turns on its maximum if the sensor reaches its treshold value
defined in the settings
Mode : Day / Night
This operating mode sets the fan to run during: Day (8am - 8pm) or night (8pm - 8am)
Minimum Setpoint: Min. fan speed of the Min Max Detection operating mode
Maximum Setpoint: Max. fan speed for the Min. Max Detection and the Unique Detection operating modes
Unique Setpoint: fan speedt of the 24/7 operating mode
Day Setpoint: fan speed of the Day for the Day/Night operating mode
Night Setpoint: fan speed of the Night for the Day/Night operating mode
5
Air Quality Sensor
Sensor type indication (VOCs: volatile organic compounds/ A: Acids / F: Formaldehyde)
Sensor sensitivity settings:
VOCs sensor (5 settings): High sensitivity, Medium/High Sensitivity, Medium Sensitivity, Medium/Low Sensitivity,
Low Sensitivity
A and F sensors (3 settings): High sensitivity, Medium Sensitivity, Low Sensitivity
Sensor replacement
Enter replacement sensor date, display the next sensor replacement date
6
Current replacement date: last filter replacement date
Next replacement date: indicates the nest replacement date
7
Confirm settings key (please validate each setting)
