5
a
b
c
d
e
1.
Selected foil
to 1.
Correct foil
selected?
If yes, confirm.
As soon as the foil is
confirmed the further
working steps appear.
These videos will be
stopped with the next
step.
Turn fixture for foil
reception upwards
and then to the right
(a/
!!
/
ok
)
until it clicks
into place.
Put in the selected foil
Erkodur 1.0 mm and
clamp with the foil
securing ring (
b)
.
2.
Foil is heated
Embed the model now
or during the heating
process in the granules.
(
c).
Push form pot with
model backwards into
the appliance as far as
it will go.(
d)
.
to 2.
Place foil recep-
tion with plate onto
the fixture and push it
under the heating until
it clicks into place(
e/f).
The foil temperature
appears, the foil is
heated.
3.
Attention
thermoform shortly
to 3.
10 °C before
reaching the rated
temperature, a warning
signal sounds and a
warning sign flashes.
The functional field „X“
interrupts the heating
process and leads back
to the display (
1
).
If the foil is pulled out of
the heating area (max 3
sec.), the working steps
videos reappear (1).
4.
Rated temperature
reached,
thermoform!
to 4.
After reaching the
rated temperature the
mandatory movement
appears on the display
to perform the thermo-
forming process.
Move by pivoting the
foil reception at the grip
cavity as far as it will
go leftwards and push
it downwards onto the
form pot.
The form pot has to be
placed at the stop posi-
tion at the very back,
otherwise the cylinder
will not disengage. At
the same time the pro-
tection shield (red) will
be pulled downwards
and disengage the
cylinder
(g).
Thermoforming
Upon reaching the rated
temperature the heating
switches off.
