2
In order to avoid da-
mages of the unit there
must not be any granu-
les in the red-bordered
area (holding fixture
for model pot)!
Recommendation
Use the machine only with
granules. Excessive granu-
les will fall in the surroun-
ding granules collecting
device.
To avoid damages, remove granules from the
base plate with magnets supplied along.
Never blow out!
The symbols of the touchpanel:
refer to instructions
main menu
foil thickness
continue
foil temperature
list of foils
back
cooling time
favourites
ok continue
rated temperature
new foil
abort
delete
special functions
add favourite
heating off
language selection
change presettings
heating on
Sensor window
Main switch
Switch on appliance
Attention: Program language ex works is
German!
A picture in the touchpanel reminds to clean
the sensor window. A dirty sensor window
leads to measurement errors. If necessary,
dust off or clean with a damp cloth (no clean-
ing agents!).
After a few seconds the basic display (menu)
automatically appears.
The touchpanel responds in the framed func-
tion fields on slight pressure.
For input, the enclosed brush for
granules is equipped with a rubber cap.
Input is also possible with fingers.
