Erkodent Erich Kopp GmbH
Siemensstraße 3 • 72285 Pfalzgrafenweiler • Germany
Tel.: +49 (0) 74 45 85 01-0 • Fax: +49 (0) 74 45 85 01-15 • www.erkodent.com • [email protected]
11
BA-Erkopress 240-EN-11-2020
Delivery form for Erkopress 240,
please check concerning completeness
1 Erkopress 240, order no. 179 000, with
1 foil securing ring (179 015)
1 foil reception (179 010)
1 form pot with model disc support (179 005)
2 model discs (1 pcs. 179 020)
*
1 power supply cable (170 001)
1 hose connection (179 025)
1 brush as an input pen (188 530)
1 foil test pack, Erkodur 240, 0.8 mm thickness, 10 pieces
machine documents (folder), instructions, guarantee card
Available foil material, Ø 240 mm:
Erkodur 240, 0.5 mm, Ø 240 mm, clear, 20 pieces, 529505
Erkodur 240, 0.6 mm, Ø 240 mm, clear, 20 pieces, 529506
Erkodur 240, 0.8 mm, Ø 240 mm, clear, 20 pieces, 529508
Erkodur 240, 1.0 mm, Ø 240 mm, clear, 20 pieces, 529510
Erkoflex-bleach 240, 1.0 mm, Ø 240 mm, transparent, 20 pieces, 589510
Erkoloc-pro 240, 1.0 mm, Ø 240 mm, transparent, 20 pieces, 599510
Erkoloc-pro 240, 1.3 mm, Ø 240 mm, transparent, 20 pieces, 599513
Erkoloc-pro 240, 2.0 mm, Ø 240 mm, transparent, 10 pieces, 599520
*
Note:
The two model discs supplied are
are used alternately.
The model disc absorbs heat during each
thermoforming process. To allow it to cool
down, the second model disc is used for the
following thermoforming process.
For easier changing, the model disc remains on the
thermoformed foil when removing the models.
After removal, separate the model disc from the models
and the foil.
